Blacktown & Mount Druitt · AS 3660.1
Slab-edge collars and continuous perimeter protection for Huntingwood distribution centres and warehouses, planned around timber racking and fitted before the pour close to Dog Kennel Reserve bushland.
Quick answer
New building work in Huntingwood needs a termite management system where the structure is habitable or has timber elements at risk, since the City of Blacktown sits within a termite-prone area under the NCC. Warehouse fit-outs and racking near the bushland edge are treated the same as any other new construction: built to AS 3660.1, checked before the slab closes and documented for the certifier ahead of occupation.
Termite barriers in Huntingwood
Huntingwood is a predominantly industrial suburb in the City of Blacktown, built up around easy access to the M4 and Westlink M7 that has drawn large distribution and manufacturing operations, including grocery logistics complexes off the Great Western Highway. New construction here looks different from a residential suburb: large warehouse and distribution centre slabs, staff amenity buildings and the occasional office fit-out, each with its own requirements depending on how the space is used and what timber elements are at risk once it's operating. The name itself nods to English-style hunting once said to have taken place on the old Woods Estate here.
A logistics site brings termite risk in places a house never would: timber pallet racking, structural timber in older warehouse fit-outs, and site boundaries that back directly onto Dog Kennel Reserve bushland, where established colonies live in fallen timber close to the industrial land. Once a warehouse is operating, that timber is often loaded, stacked and hard to access, which is exactly why getting protection into the slab and boundary correctly before construction finishes matters more here than almost anywhere else in Sydney's west. Retrofitting protection around live racking and stored product is far harder than getting it right during the build.
Reviewed by Ismail, founder · Blacktown & Mount Druitt coverage · Updated September 2026 · More Blacktown & Mount Druitt suburbs
Get my fixed quote
Local conditions
Three things set termite risk on a Huntingwood industrial site apart from a standard residential build.
Sites backing onto Dog Kennel Reserve sit close to bushland holding established termite colonies in fallen timber. That boundary needs the same careful perimeter attention as a residential block bordering bush, even on a large commercial slab.
Distribution centres often use timber pallet racking and structural timber in older fit-outs, both of which are vulnerable once a colony finds a way in. Protecting the slab properly before the building is operating avoids trying to treat around stacked stock later.
A warehouse slab is typically one large, continuous pour with fewer penetrations than a house but far more total edge length. Perimeter continuity across that length is the main technical challenge on a Huntingwood site.
What we install here
Our Huntingwood work covers warehouse and distribution centre slabs, staff amenity buildings and site boundaries bordering Dog Kennel Reserve. We detail the perimeter for the full length of a large commercial slab, collar any penetrations serving amenities or offices, and coordinate timing with the head contractor's program rather than a single trade. Pricing is a single fixed quote from your plans, covering the whole site through to the documentation you need.
Local knowledge
Our Huntingwood work sits among the distribution and logistics estates off the Great Western Highway, close to Dog Kennel Reserve and Bungarribee Creek Reserve on the suburb's bushland edges, with Arndell Park and Prospect as the nearest built-up neighbours. Sites bordering either reserve get the fullest perimeter detailing, while facilities further into the built-up logistics precinct are more standard large-slab jobs with a lighter collar count.
The City of Blacktown certifies building work in Huntingwood. Where a termite management system is required, its certifiers expect a durable notice fixed inside the meter box or an equivalent fixed point, together with a signed statement of what was used, where, and by whom, before occupation is approved. We put both together once the work is finished, along with a maintenance schedule suited to an operating industrial site.
Huntingwood at a glance
| Suburb | Huntingwood, NSW 2148 |
|---|---|
| District | Blacktown & Mount Druitt |
| Distance from Sydney CBD | 30.9 km west |
| Certifying council | Sydney CBD Council |
| Standard applied | AS 3660.1 termite management systems |
| Installed | Before the slab pour, then staged through the build |
| Documents supplied | Installation certificate and durable notice |
| Typical builds covered | New homes, knockdown rebuilds, granny flats, duplexes, townhouses |
Systems we install
Every photo below is from one of our own Sydney jobs. We look at your slab design, site and budget, then recommend a system or a combination.
01A termite-resistant sheet laid over the whole prepared footprint before concreting, so termites can't come up through the slab anywhere.
02A sealed collar on every pipe, conduit and service that passes through the slab. These gaps are the most common hidden way in.
03Protection at the slab edge and into the wall cavity, which stops termites building hidden tunnels up the outside of the slab.
04An APVMA-registered termiticide zone in the soil, with an optional pipe network under paving so it can be recharged later without digging.
05Barriers for bearers, piers and raised timber floors on sloping or elevated blocks, where there's no slab to protect.
06Detailing for sandstone cuts, block retaining walls, step-downs and cut-and-fill sites, which are common across Sydney.
Why during construction
A retrofit can only treat around a finished house. A pre-construction system protects the parts nobody will ever be able to reach again.
A barrier put in during the build costs a fraction of a post-construction system, and far less than repairing termite damage.
New houses (Class 1) and outbuildings (Class 10) with termite-susceptible framing need a compliant termite management system.
Pipe penetrations and slab joints can only be fully protected while they're still open, before the concrete goes in.
An under-slab system covers ground that no treatment from outside the finished house can ever reach.
Your certifier needs the certificate and durable notice before issuing the Occupation Certificate. We supply both together.
Documented, compliant protection gives buyers, building inspectors and lenders confidence when the home is sold.
Installation stages
A termite barrier isn't a single visit. Each part goes in when the site is ready for it, and we fit around your plumber, concreter and bricklayer.
Send your plans and slab details. We recommend a system and give you one fixed price that covers every stage.
Collars go on every service once the plumber has set out, then the membrane or soil treatment is installed across the prepared site.
Perimeter and cavity protection is fitted as the brickwork or cladding goes up, so there's no unprotected gap at the slab edge.
Where it's specified, the chemical perimeter or reticulation system is completed around the building before paths and gardens go in.
A durable notice goes in the meter box, and the installation certificate goes to your builder and certifier.
The owner gets simple care instructions and an inspection schedule so the system keeps doing its job for years.
Compare systems
Both can meet AS 3660.1. The best choice depends on your slab type, what surrounds the house and how much ongoing upkeep the owner wants.
Physical protection
Entry-point protection
Soil protection
Top-up protection
Most of the Sydney builds we work on use a combination: physical collars on every penetration plus a physical or chemical perimeter.
For builders & developers
Builders, developers and owner-builders get a fixed quote from plans, a technician who turns up when the site is ready, and paperwork that never holds up sign-off.
Consistent pricing across lots, one point of contact and a full document set for every dwelling.
Missing durable notices and unclear install records are a common reason Occupation Certificates get held up. We hand everything over together so your certifier has it all in one go.
Paperwork
A complete document set for the builder, the certifier and every future owner of the property.
A permanent notice in the meter box showing the system, install date, installer, any chemical's life expectancy and inspection advice.
For: certifier, owner, future owners
Written confirmation of the system and products used, the areas protected and our licence details.
For: builder, certifier, owner
Details of the physical system or termiticide installed, including safety data sheets for any chemicals.
For: builder, owner
How to keep the system working, plus the recommended inspection frequency under AS 3660.2.
For: homeowner
From real jobs
Photos from our own Sydney sites, not stock images. Tap any photo to see it larger.
Membrane barrier across a large residential slab
Barrier work on a Sydney Harbour site
Installation through sandstone excavation
Perimeter barrier and sleeves on a new slab
Waffle pod formwork with collared penetrations
Membrane detailed against a retaining wall
Membrane sealed around a column
Protected slab edge with collar in place
Collared penetrations before the pour
Perimeter barrier on a completed slab edge
Pipe penetrations sealed into the membrane
Collars fixed through mesh before concreting
Google reviews
Real, verified reviews from homeowners and businesses we've worked with.
Pricing
Every build is different, so we don't guess. We price from your plans and give you one fixed written quote. Quoting is free.
After handover
A barrier only works while it stays intact and visible. Pass these on to the owner.
Free fixed quote
Tell us about your build and get a clear, fixed price, fast. We usually reply within 30 minutes during business hours.
Get a fixed quote
Huntingwood questions
Still unsure? Call and talk it through with a licensed technician.
+61 450 515 215The underlying standard is the same, AS 3660.1, but what gets protected differs. A warehouse focuses on perimeter continuity across a large slab and protecting any timber racking or fit-out elements, rather than the many individual penetrations a house has. We assess each site against its actual use before recommending a system.
Yes, generally. Bushland like that reserve holds established colonies in fallen timber close to the industrial boundary, so sites backing onto it typically need a fuller perimeter than a facility set further back in the estate. We look closely at that boundary during design rather than after construction is complete.
As early as possible during design, since a large commercial slab benefits from planning the perimeter around the whole footprint rather than reacting once concrete is booked. On site, installation still has to land in the window between the plumbing or services rough-in and the pour, so keep us updated as that date firms up.
In most cases, yes. The National Construction Code requires a termite management system for new houses and outbuildings in termite-prone areas where the primary building elements can be damaged by termites. Sydney is termite-prone, so the system is installed to AS 3660.1 and your certifier asks for the installation certificate and durable notice before the Occupation Certificate is issued.
It depends on slab area, perimeter length, the number of pipe penetrations, the system chosen, site complexity and how many visits the build needs. Send us the plans and we return one fixed written quote covering every stage. Quoting is free.
Nearby
Same crew, same staging and the same certifier-ready paperwork, right across the Blacktown & Mount Druitt.
Service areas
From the Eastern Suburbs and Inner West to the Hills, the Shire and the western growth corridors. Every suburb has its own page with the local ground conditions, the council that certifies the work and the questions builders there ask us.
Slab pour coming up?
Send us your plans today for a fixed quote, or call and talk to a licensed technician about your site.
