National park boundary
Kamay Botany Bay National Park surrounds much of the suburb. Established bush that close keeps foraging pressure constant, so perimeters are continuous and junctions at any level change are detailed carefully.
Quick answer
A new dwelling at La Perouse needs a termite management system. The NCC requires one in termite-prone areas and the install follows AS 3660.1, with collars and under-slab work before the pour. The City of Randwick certifier receives the installation certificate and durable notice before the Occupation Certificate.
Termite barriers in La Perouse
Why La Perouse builds need the barrier in before the pour
La Perouse occupies the northern headland at the entrance to Botany Bay, about 13.5 km south of the city in the City of Randwick. It is named after the French navigator whose expedition arrived in January 1788, and the headland carries the Laperouse Monument, the museum in the old cable station and the 1885 fort on Bare Island. Most of the surrounding land is Kamay Botany Bay National Park, with the NSW Golf Club nearby, so the residential area is small and building work means rebuilds, additions and secondary dwellings.
Those surroundings put every block close to coastal heath and bushland. Heath and bush hold timber and litter that sustain subterranean colonies, and they forage through soil towards whatever is built nearby. Coastal exposure adds its own problem: salt air and damp keep sub-floor spaces and cavities moist, which is hard on unprotected timber. A new slab is tested at the penetrations, the edge and the joints, and all three are sealed before the pour or left open, which is why the design comes off the plans first.
Reviewed by Ismail, founder · Eastern Suburbs coverage · Updated September 2026 · More Eastern Suburbs suburbs
Get my fixed quote
Local conditions
What makes La Perouse blocks a termite risk
Three headland conditions shape a La Perouse barrier.
Coastal heath and sandy soils
Heath country and loose coastal ground behave differently at a slab edge than clay, and they move with wind and water, making a clear inspection strip and a well-finished edge essential.
Exposed, damp conditions
Salt air and sea damp keep cavities and sub-floors moist, which is hard on timber. Where designs use piers or suspended floors, those elements are protected as part of the system.
What we install here
Building in La Perouse
Work here is replacement homes, additions and secondary dwellings on a small residential pocket. We collar every service through the slab, install the under-slab component or treated zone that the design specifies, and complete the perimeter as the structure rises, including pier and suspended floor protection where the plans call for it. Access on the headland is planned with the builder ahead of time. Pricing is fixed from your drawings with each stage set out clearly.
- Under-slab membraneA termite-resistant sheet laid across the prepared ground before the pour.
- Penetration collarsCollars sealed to every pipe and conduit that comes up through the slab.
- Perimeter & slab edgeA barrier at the slab edge and into the cavity, so nothing can track up hidden.
- Chemical soil barrierAn APVMA-registered treated zone in the soil under and around the building.
- ReticulationA pipe network laid before paving so the treated zone can be topped up later.
- Piers & suspended floorsProtection for bearers, piers and suspended timber floors on sloping blocks.
Local knowledge
Around La Perouse
Residential jobs sit close to Cann Park, a couple of hundred metres from the centre, with Frenchmans Bay and Congwong Bay nearby and Cruwee Cove and Cape Banks Aquatic Reserve within a couple of kilometres. Blocks fronting national park or heath country get the fullest perimeter attention, while the coastal exposure across the whole headland means we look closely at sub-floor and pier detailing on any raised design.
The City of Randwick certifies work at La Perouse, and heritage and environmental conditions often apply given the headland setting. The termite requirement is unchanged: before the Occupation Certificate, the certifier wants a certificate covering products, protected areas and installer details, and a permanent meter box notice recording the system with its inspection advice. We supply both plus product data for the owner's records.
Slab date locked in?Tell us the pour date and we will book the stages around your builder.
La Perouse at a glance
Termite barrier facts for La Perouse
| Suburb | La Perouse, NSW 2036 |
|---|---|
| District | Eastern Suburbs |
| Distance from Sydney CBD | 13.5 km south |
| Certifying council | Botany Bay Council |
| Standard applied | AS 3660.1 termite management systems |
| Installed | Before the slab pour, then staged through the build |
| Documents supplied | Installation certificate and durable notice |
| Typical builds covered | New homes, knockdown rebuilds, granny flats, duplexes, townhouses |
Systems we install
The right barrier for your slab and your site
Every photo below is from one of our own Sydney jobs. We look at your slab design, site and budget, then recommend a system or a combination.
01Under-slab membrane
A termite-resistant sheet laid over the whole prepared footprint before concreting, so termites can't come up through the slab anywhere.
02Penetration collars
A sealed collar on every pipe, conduit and service that passes through the slab. These gaps are the most common hidden way in.
03Slab edge & cavity barrier
Protection at the slab edge and into the wall cavity, which stops termites building hidden tunnels up the outside of the slab.
04Chemical soil barrier & reticulation
An APVMA-registered termiticide zone in the soil, with an optional pipe network under paving so it can be recharged later without digging.
05Suspended floors & piers
Barriers for bearers, piers and raised timber floors on sloping or elevated blocks, where there's no slab to protect.
06Retaining walls & tricky sites
Detailing for sandstone cuts, block retaining walls, step-downs and cut-and-fill sites, which are common across Sydney.
Why during construction
Do it now, or pay more to do less later
A retrofit can only treat around a finished house. A pre-construction system protects the parts nobody will ever be able to reach again.
Costs far less
A barrier put in during the build costs a fraction of a post-construction system, and far less than repairing termite damage.
Meets the NCC
New houses (Class 1) and outbuildings (Class 10) with termite-susceptible framing need a compliant termite management system.
Hidden gaps sealed
Pipe penetrations and slab joints can only be fully protected while they're still open, before the concrete goes in.
The whole footprint
An under-slab system covers ground that no treatment from outside the finished house can ever reach.
No OC delays
Your certifier needs the certificate and durable notice before issuing the Occupation Certificate. We supply both together.
Easier to sell
Documented, compliant protection gives buyers, building inspectors and lenders confidence when the home is sold.
Installation stages
Installed in stages that follow your build
A termite barrier isn't a single visit. Each part goes in when the site is ready for it, and we fit around your plumber, concreter and bricklayer.
Step 01Design / DA
Plans & fixed quote
Send your plans and slab details. We recommend a system and give you one fixed price that covers every stage.
Step 02Before the pour
Collars & under-slab
Collars go on every service once the plumber has set out, then the membrane or soil treatment is installed across the prepared site.
Step 03Walls going up
Slab edge & cavity
Perimeter and cavity protection is fitted as the brickwork or cladding goes up, so there's no unprotected gap at the slab edge.
Step 04Before landscaping
Final perimeter
Where it's specified, the chemical perimeter or reticulation system is completed around the building before paths and gardens go in.
Step 05Pre-OC
Notice & certificate
A durable notice goes in the meter box, and the installation certificate goes to your builder and certifier.
Step 06Handover
Owner advice
The owner gets simple care instructions and an inspection schedule so the system keeps doing its job for years.
Compare systems
Physical or chemical termite barrier?
Both can meet AS 3660.1. The best choice depends on your slab type, what surrounds the house and how much ongoing upkeep the owner wants.
Physical protection
Physical membrane, mesh or graded stone
No chemicals- How it worksA layer termites can't chew through, laid under the slab or around its edge.
- Life & upkeepDesigned to last as long as the slab while it isn't disturbed. No top-ups.
- Good fit forSlab-on-ground homes, and owners who prefer a non-chemical option.
Get this quoted
Natural, lasting defence
Entry-point protection
Penetration collars
- How it worksCollars sealed around each pipe and conduit that passes through the slab.
- Life & upkeepLong-lasting when fitted properly before concreting.
- Good fit forEvery slab, usually paired with a perimeter system.
Get this quoted
Small detail, big difference
Soil protection
Chemical soil barrier
- How it worksA treated zone of termiticide in the soil under and around the building.
- Life & upkeepDepends on the product label and soil conditions. Can be re-applied.
- Good fit forTighter budgets and some complex sites.
Get this quoted
Flexible and provable
Top-up protection
Reticulation system
Rechargeable- How it worksPipes laid before paving so termiticide can be pumped back into the soil.
- Life & upkeepCan be recharged for the life of the building without lifting paths.
- Good fit forHomes that will be surrounded by paving or landscaping.
Get this quoted
Protection you can renew
Most of the Sydney builds we work on use a combination: physical collars on every penetration plus a physical or chemical perimeter.
For builders & developers
Built around your program, not ours
Builders, developers and owner-builders get a fixed quote from plans, a technician who turns up when the site is ready, and paperwork that never holds up sign-off.
What we need to quote
Architectural or slab planSlab type: raft, waffle pod or suspendedSite addressRough pour dateRetaining wall & step-down details
Fitting in with your trades
- Collars in before the pour inspection
- Slab edge & cavity as walls go up
- Perimeter done before paving
Multi-unit & repeat work
Consistent pricing across lots, one point of contact and a full document set for every dwelling.
No certification delays
Missing durable notices and unclear install records are a common reason Occupation Certificates get held up. We hand everything over together so your certifier has it all in one go.
Paperwork
Everything you get at handover
A complete document set for the builder, the certifier and every future owner of the property.
Durable notice
A permanent notice in the meter box showing the system, install date, installer, any chemical's life expectancy and inspection advice.
For: certifier, owner, future owners
Installation certificate
Written confirmation of the system and products used, the areas protected and our licence details.
For: builder, certifier, owner
Product information
Details of the physical system or termiticide installed, including safety data sheets for any chemicals.
For: builder, owner
Care & inspection advice
How to keep the system working, plus the recommended inspection frequency under AS 3660.2.
For: homeowner
From real jobs
Recent termite barrier installations
Photos from our own Sydney sites, not stock images. Tap any photo to see it larger.
Membrane barrier across a large residential slab
Barrier work on a Sydney Harbour site
Installation through sandstone excavation
Perimeter barrier and sleeves on a new slab
Waffle pod formwork with collared penetrations
Membrane detailed against a retaining wall
Membrane sealed around a column
Protected slab edge with collar in place
Collared penetrations before the pour
Perimeter barrier on a completed slab edge
Pipe penetrations sealed into the membrane
Collars fixed through mesh before concreting
Google reviews
What Sydney clients say about us
Real, verified reviews from homeowners and businesses we've worked with.
5.0
Read our reviews on Google
View
Pricing
What sets the price of a barrier
Every build is different, so we don't guess. We price from your plans and give you one fixed written quote. Quoting is free.
- 01Slab area & perimeterBigger footprints need more material, more edge protection and more labour.
- 02System typeFull under-slab, perimeter-only, chemical and reticulation options are all priced differently.
- 03Number of penetrationsEach plumbing and electrical service through the slab needs its own collar.
- 04Site complexityRetaining walls, step-downs, sandstone and suspended floors add detailing.
- 05Number of visitsStaged installs follow your program. Multi-dwelling sites can often be combined.
- 06Site accessTight blocks, steep driveways and limited street frontage slow the set-out and add time on site.
After handover
Keeping the barrier working
A barrier only works while it stays intact and visible. Pass these on to the owner.
- Keep at least 75 mm of the slab edge exposed. Don't cover it with soil, mulch or paving.
- No garden beds or stacked timber against the house
- Keep weep holes clear of render and debris
- Fix leaking taps, downpipes and hot water units near the walls
- Ask the installer before drilling through the slab or adding pipes
- Book a timber pest inspection at least every 12 months
Annual timber pest inspection
Handed over recently? We inspect the barrier and the building every 12 months.
Free fixed quote
Protect your build
before the pour
Tell us about your build and get a clear, fixed price, fast. We usually reply within 30 minutes during business hours.
- Send your detailsBuild type, suburb and rough slab pour date.
- Share your plansSlab plan or architectural drawings, plus any retaining wall details.
- Get your fixed quoteOne written price covering every installation stage.
- Fast responseWithin 30 mins
- Licensed expertsQualified & insured
- Trusted locallyAcross Sydney
Get a fixed quote
Tell us about your build
within 30 minutes
La Perouse questions
Answered
Still unsure? Call and talk it through with a licensed technician.
+61 450 515 215Does the national park boundary change what you install?
It sharpens the detailing rather than changing the standard. Park and heath country hold mature timber that supports established colonies, and they forage through soil, so blocks on that boundary get a continuous perimeter, careful treatment at every junction, and reticulation where future landscaping will cover the treated zone.
We are extending rather than rebuilding. Is a barrier needed?
If the addition includes a new slab or new primary building elements that termites can damage, it needs compliant protection, and the certifier will look for documentation covering that work. We assess the design and quote for the new portion, tying it into any existing protection where the detailing allows.
How do coastal conditions affect the system here?
Salt air and damp are hard on timber, and loose coastal soils shift more than clay, so the edge finish and the inspection strip matter. Where the design lifts the building on piers or uses a suspended floor, those elements are included in the system rather than treated as outside its scope.
Does a new home need a termite barrier in NSW?
In most cases, yes. The National Construction Code requires a termite management system for new houses and outbuildings in termite-prone areas where the primary building elements can be damaged by termites. Sydney is termite-prone, so the system is installed to AS 3660.1 and your certifier asks for the installation certificate and durable notice before the Occupation Certificate is issued.
What does a pre-construction barrier cost?
It depends on slab area, perimeter length, the number of pipe penetrations, the system chosen, site complexity and how many visits the build needs. Send us the plans and we return one fixed written quote covering every stage. Quoting is free.
Nearby
We also install barriers around La Perouse
Same crew, same staging and the same certifier-ready paperwork, right across the Eastern Suburbs.
Service areas
Termite barriers across 379 Sydney suburbs
From the Eastern Suburbs and Inner West to the Hills, the Shire and the western growth corridors. Every suburb has its own page with the local ground conditions, the council that certifies the work and the questions builders there ask us.
St George
31 suburbsSlab pour coming up?
Lock in your termite barrier before the concrete truck arrives
Send us your plans today for a fixed quote, or call and talk to a licensed technician about your site.
